To get started, locate the audio icon (shaped like a small speaker) located in the System Tray in the lower left-hand corner of your screen. One very easy solution that has worked for some is to simply let Windows fix it for you! This only takes a few steps and is relatively straightforward. If you’ve checked these things and the surround sound still isn’t working, then follow this guide to see three different solutions for getting it working again. Hopefully, that’s not the case, but it can happen. These include restarting your PC, unplugging the USB sound card from your PC and re-inserting it into another USB slot, and removing the headphone jacks from the plugs in the sound card and plugging them back in.Īlso, look to see if your headset or sound card has been physically damaged at all. What If You Want to Disable Surround Sound?īefore you try uninstalling the drivers, it’s best if you try some of the simple solutions first if you haven’t already.Third Solution – Uninstall and Reinstall the Driver You'll be able to hear the result of your adjustments in real-time as the test cycles through all the output channels. TIP: Make your sound-source adjustments as the test is being conducted. A series of sounds will be output to the headset, each corresponding to an output channel in the Dolby® Surround 7.1 configuration. NOTE: Clicking the reset button will reset the sound-source settings for all channels, whether or not Dolby Surround® is enabled.Ĭlick the Experience surround sound button to test the surround-sound-source configuration. NOTE: Only left and right channel (stereo) sound-source output levels can be adjusted when Dolby® Surround is disabled.Ĭlick the reset button to reset all sound-source level settings to their default state. The incremental adjustments range from 0 to 11. NOTE: The Dolby® Headphone logo will appear lit when Dolby® Surround is enabled.Ĭlick the up or down arrows to adjust the sound-source output levels. The Surround Sound panel allows you to adjust sound-source output levels for both stereo and Dolby® Surround sound.Ĭlick the switch to enable or disable Dolby® Surround in the Surround Sound Mixer. NOTE: The Preamp setting cannot be adjusted manually.Ĭlick the reset button to reset the equalizer settings to their default state. The Preamp slider will automatically adjust when manually configuring equalizer band levels. Use the sliders to fine-tune the settings of the G430's audio output on the 10-band equalizer. NOTE: The power button and equalizer icon above the button will appear lit when the Advanced Equalizer is enabled. The button will appear lit when the Advanced Equalizer is enabled. NOTE: Bass and treble level controls cannot be adjusted when the Advanced Equalizer is enabled.Ĭlick to show or hide the Advanced Equalizer control panel.Ĭlick the power button to enable or disable the Advanced Equalizer. The incremental adjustments range from -12 db to +12 db. Use the Bass and Treble sliders to adjust the bass and treble levels of the audio output. NOTE: Mute control on the physical microphone mute switch is independent of the Microphone Mute control in Logitech Gaming Software. The mute button will appear lit when mute is enabled. NOTE: The Volume Mute button will appear lit when mute is enabled.Ĭlick the Microphone Mute button located under the Microphone slider to mute the voice input. The incremental adjustments range from 0 to 100.Ĭlick the Volume Mute button located under the Volume slider to mute audio output. Use the Microphone slider to adjust the voice input levels. For example, setting the volume slider to 50 will become the maximum volume adjustable through the volume dial on the headset cord. NOTE: Volume adjustments made on the physical volume control dial will be subject to the master volume adjustment in Logitech Gaming Software. The incremental adjustments range from 0 to 100. Use the Volume slider to adjust the audio output levels. The Audio Experience panel provides both basic and advanced audio output-level controls, as well as microphone input-level controls.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |